It is formed when the pentane gas in the granules of the raw material polystyrene causes the granules to swell and stick together when polystyrene contacts water vapor.
 
- Depending on the place and purpose of use, it can be produced in panel or mold form at different dimensions and technical properties, as well as with different edge and surface shapes.
- It is used for heat insulation and packaging purposes.
- Its thermal conductivity value is λ ≤ 0,040 W/mK.
- Its water vapor diffusion resistance factor is μ=20-100.
- Its use temperature is between -50 and +75°C.
- It has no capillary absorption.
- Despite being resistant to acids and bases, it is sensitive against chimney gases, methane group gases, gasoline group products, ethers, esters and amines.
- It is sensitive against the ultraviolet rays of the sun.
- It is in classes E and F according to EN 13501-1.
- It is produced in facilities with the ISO 9001 Quality Assurance System, ISO 14001 Environmental Management System and OHSAS and OHSAS 18001 Occupational Health and Safety Management System certificates given by BVQI.
- İzocam EPS products subject to TS 7316 EN 13163 Standard are allowed to bear the CE mark within scope of the Regulations on Construction Materials (89/106/ EEC).





Oraysan ATAK HOLDING A.Ş. subsidiary.
Copyright © 2011 Oraysan İnşaat, All Rights Reserved    info@oraysan.com.tr     + 90 212 664 60 00
Oraysan Facebook SayfasıOraysan Twitter Sayfası